Humminbird XTH 9 DB 35 KW T Bronze Thru-Hull Transducer

Bronze thru-hull transducers are for large boats and boats with in-board motors that make typical transducers ineffective. Not recommended for trailered boats. Professional installation recommended. 30 ft cable and hardware included. This model will work with 917c, 931c DF, 937c DF, 937 DF2, 957c.

The Humminbird XTH 9 DB 35 KW T Bronze Thru-Hull Transducer is for large boats, and boats with in-board motors that make most typical transducers ineffective. This bronze thru-hull transducer is not recommended for trailered boats, and Humminbird recommends you have it professionally installed due to the fact that it requires a hole be drilled in the hull and the shaping of a fairing block. The XTH 9 DB 35 KW T is a dual-beam, one-kilowatt transducer with 20-, and 74-degree beam angles and operating frequencies of 200 kHz and 50 kHz. This unit measures 4.2 x 7 inches (W x H), with a 1.5-inch below-hull depth and a shaft diameter of 0.81 inches. The Humminbird XTH 9 DB 35 KW T comes with a 30-foot connecting cable and all the necessary mounting hardware, but does not include a fairing block. The XTH 9 DB 35 KW T is for use with Humminbird's 931C DF and 937C DF sonar systems, and is backed by Humminbird's one-year limited warranty.